Maxply-40/50

UV-RESISTANT WATERPROOFING BITUMINOUS SHEET

DESCRIPTION

MAXPLY 40 TOP is a waterproofing bituminous sheet of 4.0 kg/m2 with self-protected surface. It is UV-resistant and allows cold temperature flexibility (-5C)

It is composed of a reinforced polyester felt reinforcement, covered on both sides with flexible polymer modified bitumen mastic. On the upper color is used as a UV-barrier and allows it use for outdoor areas. The anti-adhesive material used on the lower side is polyethylene firm. It is tested according to standard EN test methods.


Maxply 40

Maxply Primer

WATER-BASED BITUMINOUS EMULSION

DESCRIPTION

MAXPLY PRIMER is a water-based bituminous emulsion specially designed to prime and repare mortar, metallic sheets and wood before welding bituminous sheets in roofs. It complies with the specifications required by UNE 104-231 (type B). Solvent- free and non-flammable primer.

Apply by brush, roller or airless spray machine. Consumption between 0,2 to 0,4 kg/ m2 per coat, depending on substrate and porosity. Available in packaging of 5 kg and 25 kg drums. Shelf life 12 months kept under cover, protected from direct sunlight, humidity and freezing, with temperature between 5℃ and 40℃.


Maxply Primer

Maxseal Flex

FLEXIBLE CEMENT-BASED WATERPROOF COATING FOR CONCRETE AND MASONRY

DESCRIPTION

MAXSEAL FLEX -HK is a two-component product. Component A is a liquid based on special synthetic resins and component B, is a powder mortar based on a mixture of special cements, additives and well-graded aggregates. Once applied and cured, MAXSEAL FLEX -HK provides a fully flexible and waterproof coating with very high adhesion on common substrate in construction such as concrete, bricks, concrete block, plaster, etc.







APPLICATION FIELDS

  • o Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.
  • o Waterproofing of below-grade structures like basements, retaining walls, foundations, tunnels, galleries subjected to both positive or negative high water pressure.
  • o Indoor flexible waterproofing and tile fixing of bathrooms, kitchens and other wet rooms in hotels, hospitals, offices and residential buildings.
  • o Flexible waterproofing of roofs, terraces and balconies under ceramic tiles, screed mortars, cellular concrete and other pavements.
  • o Waterproofing and chemical protection against aggressive water and harmful salts for concrete in underground works, foundations, pipelines, etc.

ADVANTAGES

  • o Provides a continuous flexible coating which ensures complete waterproofing and adapts to thermal movements.
  • o Covers shrinkage and hairline cracks of concrete.
  • o It is permeable to water vapour, allows the substrate to breathe.
  • o It can be used on wet surfaces.
  • o Resists hydrostatic negative pressure from ground water when used for underground applications
  • o Excellent adhesion and easy to use, quick application and it does not require bonding agents.
  • o Non-toxic, solvent-free and non-flammable.
  • o Suitable for contact with potable water.
  • o Environmentally friendly. Suitable for poor ventilated areas.

Maxseal Flex

Maxsel Super

CEMENT-BASED WATERPROOF COATING WITH CRYSTALLISATION AND OSMOTIC PROPERTIES

DESCRIPTION

MAXSEAL SUPER is a special waterproofing coating made of a mixture of cements, carefully controlled aggregates and special organic and inorganic additives. Its special formula improves the osmotic effect of the application allowing the penetration in the concrete through its capillary system. The product crystallizes inside sealing, waterproofing and protecting the concrete structure. It has been designed to be applied on fresh or set concrete, pre-cast concrete, concrete blocks or cement plasters but is also suitable for applications in bricks and masonry.





APPLICATION FIELDS

  • o Waterproofing and coating drinking water tanks.
  • o As a waterproof coating for exterior and walls.
  • o Basements and below-grade structures subjected to positive or negative water pressure.
  • o Waterproofing and protection of concrete foundations, retaining walls and foundation slabs.
  • o As a waterproof coating for concrete blocks and prefabricated panels.
  • o As a decorative, waterproof finish for silos and cooling towers in thermal plants.
  • o Repairing and waterproofing irrigation channels.
  • o As a coating to waterproof dams and retaining walls.
  • o To protect and waterproof concrete in water treatment plants.
  • o Waterproofing tunnels and shafts.
  • o Waterproofing swimming pools.

ADVANTAGES

  • o Suitable for use in contact with drinking water.
  • o The penetration inside concrete provides internal sealing and protective effect. It seals cracks up to 0,4 mm.
  • o 100% waterproof coating, even in permanent immersion applications
  • o subjected to high pressures.
  • o For indoor applications, especially basements, the coating resists hydrostatic pressure from groundwater.
  • o Can be applied on dampened surfaces, being easy to use free of future maintenance costs.
  • o Resists the corrosive effects of salt water and atmospheric pollution.
  • o Longer lasting than paints and other coatings.
  • o Once it sets, can be painted over. It can also be covered with ceramic tiles as in swimming pools or decorative outdoor murals.
  • o Allows the substrate the water vapour diffusion.

Maxseal Super

Maxseal Foundation

WATERPROOF, CEMENT-BASE COATING FOR EXTERIOR UNDERGROUND CONCRETE AND MASONRY

DESCRIPTION

MAXSEAL FOUNDATION is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high resistance to aggressive waters.


USES

  • o Basically with high phreatic levels, as foundation waterproofing, as well as below grade leaks in foundations.
  • o It can also be used as waterproofing layer or barrier against humidity by capillarity on the different work units.

ADVANTAGES

  • o Good adherence, it becomes incorporated to the support where it is applied, it fills and seals pores.
  • o It can be applied on wet surfaces not needing these to be dried.
  • o Lesser cost than any other traditional system.
  • o Large duration and superior to any other asphalt product.

Maxseal Foundation

Max Grout

NON-SHRINK, HIGH-RESISTANCE FLUID MORTAR FOR FILLINGS, ANCHORAGES AND STRUCTURAL REPAIR

DESCRIPTION

MAXGROUT is an one-component non-shrink mortar formulated from special cements and well-graded mineral products which provides high mechanical properties and fluidity. Contains no chlorides or metal particles. It comes in powder form, ready to use mixing only with water.







APPLICATION FIELDS

  • o Anchoring of pillars in concrete prefabricated structures.
  • o Filling of steel column bases.
  • o Beam support in bridges.
  • o Anchoring of bolts, cables, etc.
  • o Filling of machinery foundation between concrete and steel plates.
  • o Structural repair and strengthening of damaged or weak concrete structures such as foundations, beams, pillars, etc.
  • o Repairing joints in pavements.
  • o Void-filling corrective process and consolidation under concrete slabs.

Max Grout

Maxsheen

WATERPROOF AND PROTECTIVE ACRYLIC COATING FOR OUTDOOR USE OVER CONCRETE, MASONRY, RENDER AND PLASTER

DESCRIPTION

MAXSHEEN is a water-based acrylic coating which provides a high performance and durable coating suitable for waterproofing, protection and decoration of façades, concrete structures and masonry. It comes in two finishes: smooth and textured.

APPLICATION FIELDS

  • o Protection against carbonation on concrete structures, bridges, industrial and residential buildings.
  • o As a decorative finish with the required texture and colour, over MAXSEAL, CONCRESEAL PLASTERING, MAXQUICK® and MAXREST®.
  • o Decorative and waterproof coating on concrete surfaces, masonry, render, stone, asbestos cement, plaster ceramic and wood.
  • o High quality decorative finish for indoor walls.

ADVANTAGES

  • o Excellent protection against carbonation of concrete. Very high resistance to CO 2 penetration, preventing corrosion of rebars caused by carbonation process.
  • o Very good adhesion on common building materials.
  • o Allows substrate to breathe. Permeable to water vapour.
  • o Waterproof to rain water and withstands weathering.
  • o Quick drying depending on the temperature and relative humidity.
  • o It is flexible. It does not crack due to normal temperature changes.
  • o Excellent resistance to stains and dirt.
  • o Easy to clean. Just wash with soap and water.
  • o Wide colour range and two textures of finish
  • o Resistant to UV rays. Excellent colour stability.
  • o Resistant to concrete alkali.
  • o Easy to apply and high yield.

Max Sheen

Maxplug

QUICK-SETTING HYDRAULIC MORTAR FOR STOPPING LEAKS UNDER PRESSURE

DESCRIPTION

MAXPLUG® is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once MAXPLUG® sets, it adheres perfectly to the substrate. It only requires water for mixing.







APPLICATION FIELDS

  • o Sealing of leaks in concrete surfaces, solid masonry and other sound substrates wherein water flows through cracks and holes.
  • o Emergency repairs on concrete water pipes. For broken concrete pipes, MAXPLUG® will even work when the concrete pipes are under hydrostatic pressure.
  • o Emergency plugging of gas leaks.
  • o Sealing of concave corners and working joints, filling the grooves with MAXPLUG® in the shape of a cove.
  • o Anchoring of bolts and other accessories that require immediate use.
  • o Stopping running water in basements, tunnels, foundations and sewers under hydrostatic pressure.
  • o It is a suitable maintenance material for homes and industry.

ADVANTAGES

  • o Does not shrink or become weak due to its exothermic reaction.
  • o MAXPLUG increases in volume, giving a permanent seal in areas where there is flowing water.
  • o Its quick setting-time from 3 to 5 minutes can be controlled, either speed up or slowed down, by adding warm or cold water. Setting may even be instantaneous by adding hot water during warm weather.
  • o Its mechanical properties are similar or higher than concrete.
  • o Non-toxic. It can be used in contact with drinking water.
  • o It sets even underwater.
  • o Does not contain chlorides or other corrosive compounds.
  • o Easy to use.

Max Plug

Biseal WA

CHLORIDE-FREE WATERPROOFING LIQUID ADMIXTURE FOR CONCRETE AND MORTARS

DESCRIPTION

BISEAL WA is a chloride-free liquid waterproofing admixture that reduces the permeability and water absortion of mortars and concrete, providing high waterproofing properties.


APPLICATION FIELDS

  • o Obtaining mortars and concrete with low water absortion by capillarity or direct water pressure in foundations, basements, tunnels, channels, precast elements, marine structures, etc.
  • o Interior or exterior waterproof renders on concrete blocks, brick, concrete, etc.
  • o Rendering of reservoirs, swimming pools, basements, elevator shafts, wells and canals.

ADVANTAGES

  • o Very simple use, only to be added with the mixing water.
  • o It improves durability agaist freeze-thaw cycles and weathering.
  • o It reduces the appearance of superficial salts and eflorescences.
  • o It provides a plasticizer side effect on fres concrete, improving its workability and allowing to reduce mixing water ratio.

Biseal wa

Drizoro Mesh

GLASS FIBRE MESH FOR REINFORCEMENT OF COATINGS AND CEMENT MORTARS

DESCRIPTION

DRIZORO MESH 58/130/140 is an alkali-resistant glass fibre mesh especially designed for the reinforcement of waterproof coatings and cement-based mortar layers.




APPLICATION FIELDS

  • o DRIZORO MESH 58: Reinforcement of flexible waterproof coating;cement-based MAXSEAL FLEX (Technical Bulletin nº29), and acrylic-based MAXELASTIC (Technical Bulletin nº 18).
  • o DRIZORO MESH 130: Reinforcement of rendering and plastering mortars:CONCRESEAL PLASTERING (Technical Bulletin 117) and external thermal insulation composite systems CONCRESEAL TH (Technical Bulletin 117).
  • o DRIZORO MESH 140: Reinforcement of rendering and plastering mortars: CONCRESEAL TOP (Technical Bulletin 40) or other cement-based renders.
  • o Overlapping, reinforcement and bridging of cracks, corners, corner fillets, construction joints, penetration pipes and other critical points between different types of substrates.
  • o Improve mechanical characteristic of waterproof coatings exposed to thermal movements by weather conditions.
  • o Enhances highly the crack-bringing capability of waterproofing membranes.

ADVANTAGES

  • o Provides a continuous reinforcement that absorbs stress from the substrate and helps to avoid the formation of cracks by movements.
  • o Greatly improves the mechanical resistance of the coating, such as tensile strength and impact.
  • o Provides a better application of coating over smooth surfaces and non-porous substrates.
  • o Long durability and excellent chemical stability against to alkalis and UV-rays.
  • o Flexible, easy placement on irregular surfaces.
  • o Non-irritating on skin contact.

Drizoro Mesh

IWL Products

Coldstick Primmer

Coldstick is solvent based rubber modified bituminous primer. It is used as a surface preparation for Waterproofing and Pipe Coating Applications. It is cold applied primer. Coldstick is supplied in 20 Kg tins

Coldstick is a cold applied primer and it is applied by painting over the substrate by brush / spray. Primer is left to dry until the solvent evaporates. Please note that the primer is inflammable due to presence of solvent. Therefore care must be taken that no flame is applied on the primer before the solvent evaporates. Since the primer contains solvent, prolonged exposure especially in closed areas should be avoided

Coldstick is used to prepare surfaces for pipecoating and wrapping or waterproofing applications. It penetrates into porous subsurfaces and has excellent adherence and elasticity.

More Information

Hyperplas Polyester Membrane 3mm & 4mm

Hyperplas Polyester is a high softening point, APP modified polymeric waterproofing membrane manufactured to highest international standards. It consists of a center core of Spun Bonded Polyester mat for extra mechanical strength. The center core is protected on both sides with Polymeric Asphaltic mix, which has high penetration, high heat resistance and high softening point. With high tensile strength, the membrane is still extremely flexible and pliable to adapt to contours. For this reason this membrane makes an ideal waterproofer. Hyperplas Polyester is also available with dual centre core of a High Molecular High Density Polyethylene film. This additional polyethylene core provides additional security. Hyperplas Polyester is available in grades of 2mm, 3mm, 4mm, 3Kg, 3.5Kg or 4Kg/sqm.

Application of Hyperplas Polyester is fast and easy. Smooth surface with minimum slope is required to apply the membrane. The surface is first cleaned to eliminate all sharp projections. Suitable IWL Primer / IWL CS / IWL Blown Bitumen is then coated on the surface (for more details refer relevant data sheets ). Hyperplas Polyester is unrolled over the surface with torch application (with overlaps of 10cm) and bonded to the substrate. The overlaps are to be sealed by flame torch. Special care is to be taken at singularities such as drains, expansion joints, etc. Details of application are available in Hyperplas Application Guide. Hyperplas Polyester can be topped with topping such as cement screed or tiles on accessible roofs with a chicken wire mesh reinforcement. Inaccessible roofs can be topped with a layer of IWL Bitumen & IWL Aluminium Paint.

More Information