Aluminum Foil

SISILATION- with a product history of over 20 years SISALATION is the brand leader in Sri Lanka for Roof Insulation and has gained recognition for its lasting quality and performance in the Roof insulation Industry. This is one of the key strengths that this division has. SISALATION Heat Reflective Roofing Foil is of superior quality and comes highly recommended by Consultant Architects and leading Contractors. In keeping with strategy of offering a complete solution the services rendered by this division include analyzing the type of insulation required and advise the customer on all areas that are related to reducing temperature in a building and conserve energy. They also offer services related to installation and/or supervise and guide if the client decides to do the installation by themselves.

SLJ Sisilation - 100 | SLJ Sisilation - 735

SLJ Sisilation -100

Double Sided Reflective Aluminum Foil Insulation

Description & Application

A light duty, utility grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural Kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. It is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glasswool / rockwool / mineral wool / foam insulation, it is excellent as a vapor barrier for air-conditioning ducts, pipes and vessels.

Product Construction

COMPOSITION DESCRIPTION VALUE (ENGLISH) VALUE (METRIC)
Foil Aluminum 0.28 mil 7 micron
Reinforcing - MD Fiberglass 2 / inch 8 / 100mm
Reinforcing - XD Fiberglass 3 / inch 12 / 100mm
Adhesive Polyethylene ------ ------
Kraft Natural 36.6 lbs / 3000 ft2 60gsm
Adhesive Polyethylene ------ ------
Foil Aluminum 0.28 mil 7 micron

Typical Physical Properties

PHYSICAL PROPERTIES DESCRIPTION VALUE (ENGLISH) VALUE (METRIC)
Basis Weight Aluminum 0.28 mil 7 micron
Permeance (WVTR) Fiberglass 2 / inch 8 / 100mm
Tensile Strength - MD Fiberglass 3 / inch 12 / 100mm
Tensile Strength - XD Polyethylene ------ ------
Burst Strength Natural 36.6 lbs / 3000 ft2 60gsm
Low Temperature Resistance ion Polyethylene ------ ------
High Temperature Resistance Aluminum 0.28 mil 7 micron
Emissivity ASTM E408 0.03 0.03

AVAILABLE ROLL WIDTH: 1.25M, 1.35M

REMARKS

  1. The data above are typical results and subject to change without notice.
  2. Tolerance: Weight and Thickness: 10%; Width: 3mm; Length: 0.5%.
  3. The products should be stored at room temperature, kept from wet and kept away heat source.
  4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

SLJ SISILATION - 735

Foil-Scrim-Kraft Facing & Vapor Barrier

Product Application

A utility grade Foil-Scrim-Kraft Facing with 3-way scrim and 50gsm Kraft, mainly used as a facing & vapor barrier of glasswool / rockwool / mineral wool / foam duct wrap insulation, also suitable for other insulation applications where a general use vapor retarder is needed. It is also a good choice for radiant barrier applications because of its low emissivity.

Facing Composition

COMPOSITION DESCRIPTION VALUE (ENGLISH) VALUE (METRIC)
Foil Aluminum 0.28 mil 7 micron
Reinforcing - MD Fiberglass 2 / inch 8 / 100mm
Reinforcing - XD Fiberglass 3 / inch 12 / 100mm
Adhesive Polyethylene ------ ------
Kraft Natural 30 lbs / 3000 ft2 50gsm

Typical Physical Properties

PHYSICAL PROPERTIES TEST METHOD VALUE (ENGLISH) VALUE (METRIC)
Basis Weight Scale 17.4 lbs / 1000 ft2 85 gsm
Permeance (WVTR) ASTM E96, Procedure A 0.1 perm 5.75 ng/N.s
Tensile Strength - MD ASTM D828 26 lbs/In 115 N/25mm
Tensile Strength - XD ASTM D828 11.5 lbs/In 50 N/25mm
Burst Strength ASTM D774 43.5 psi 30 N/cm2
Low Temperature Resistance ion cASTM D1790 4 hrs @-40 F (- 40 C) Remains Flexible No Delamination Remains Flexible No Delamination
High Temperature Resistance ASTM D1790 4 hrs @ +240 F (+116 C) Remains Flexible No Delamination Remains Flexible No Delamination
Dimensional Stability ASTM D1204 @ 150F (65C) Less than 0.5% Less than 0.5%
Emissivity ASTM E408 0.03 0.03

AVAILABLE ROLL WIDTH: 1.25M, 1.35M

REMARKS

  1. The data above are typical results and subject to change without notice.
  2. Tolerance: Weight and Thickness: 10%; Width: 3mm; Length: 0.5%.
  3. The products should be stored at room temperature, kept from wet and kept away heat source.
  4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

Aluminum Tape and Roofing Mesh

BRC WELDED ROOFING MESH - We use in fixing of reinforcement solutions to the construction industry. This reinforcing Mesh has a wide variety of uses ranging from the ordinary house hold to heavy Industry.


ALUMINIUM TAPES - Aluminium Tape are available in two types as Reinforced and Non reinforced with different size